Being Well - Cubit Measurements

Introduction to Cubits

Cubits provide the measures through which subtle energy systems become operative and tangible. We define Cubit measures as working parameters, showing how fixed proportions guide form, orientation, and resonance in energy tools. Grounded in ancient metrology and oriented into practice, these lengths serve as conduits which transcend from principle to embodiment.

The word Cubit refers to one of the earliest known units of measurement, used by ancient civilizations for architecture, trade, and sacred construction.

Derived from the Latin Cubitum meaning “elbow”, a Cubit was traditionally defined as the distance from the elbow to the tip of the middle finger - typically between about 18 and 22 inches, depending on culture and period. In Egypt, the Royal Cubit became the state standard. It was defined as 7 palms equalling 28 digits, and surviving rods cluster around 20.6 to 20.8 inches. This standard underpinned large-scale works including pyramid construction, temple design, and administrative surveying.

Egyptian measurement formed a coherent system based on the Royal Cubit, and a shorter Cubit of roughly 45 cm appears in certain contexts.¹ Surveyors and builders also worked with larger derived units such as the Khet, equal to 100 Royal Cubits, and used ropes, measuring rods, and plumb devices to transfer lengths with consistency. The result was a durable metrological framework that tied design intent to on-site execution.

Calibration and standards were essential to Egyptian state projects. Granite Cubit Rods served as master references, and working rods were produced and compared with exemplars to maintain uniformity. A frequently repeated tradition in later metrology literature states that, at each full moon, foremen presented workers’ Cubit sticks for verification against a royal master; failure to attend could incur severe punishment. While this account is widely circulated, direct administrative texts detailing the ritual in this exact form are scarce. It is presented here as a traditional report about standard-keeping rather than as a documented decree.

Beyond their Egyptian roots, Cubits also carried metrological as well as symbolic significance across the ancient Mediterranean and Near East, where measures of length were frequently associated with order, ratio, and sacred architecture.

Modern Tensor Technology draws on rediscovered variations of the Cubit which reveal harmonic relationships in both geometry and frequency. Each of these rediscovered Cubits function not simply as a measure of length, but as resonant keys which unlock specific Scalar frequencies and energetic qualities. Cubit lengths are central to the function of Tensor Rings. Each measurement determines the distinct resonant frequency that results in the ring’s intended energetic function.

In the following, discover the unique Cubits we craft into precision tools at Being Well - each serving unique purpose and gateway to specific energetic qualities and transformative potential!

The Sacred Cubit

Recognized as the foundational unit of Tensor Technology, the Sacred Cubit is the first cubit (re)discovered in the early 1990’s by Slim Spurling. It is a precise ancient measurement of 20.6 inches in length with a resonate frequency of 144 MHz, forming a coherent, standing Scalar wave that interacts deeply with both biological and environmental systems.

What distinguishes the Sacred Cubit’s from other Cubit measurements is its centering, stabilizing quality, which is most closely associated with the physical aspects of being. The 144 MHz frequency creates a self-sustaining zone of influence that entrains energy toward coherence, making it especially beneficial for harmonizing local fields, whether around the body, in water, or in an environment.

Energetic Benefits

Resonates at 144 MHz (scalar field)
Supports grounding, energetic clarity, and balance
Harmonizes EMFs and environmental stress
Enhances the energy of water, crystals, and living spaces
Excellent for use in meditation or healing practices

Common Uses

Water Structuring and increased Bio-availability
Pain Relief, specifically Headaches, Arthritis, and inflammation.
EMF Radiation Mitigation & Harmonization
Grounding and Calming of the Nervous System.
Meditation and Energy healing

The Lost Cubit

The Lost Cubit is a specific Cubit length used within Tensor Technology that measures 23.49 inches and corresponds to a base scalar resonance of approximately 177 MHz. The name “Lost Cubit” reflects both its relatively recent (re)discovery in the modern Tensor research lineage and its absence from many classical measurement systems despite its clear harmonic relationships with other Cubit measurements. It was originally identified by Hans Becker through harmonic analysis and sacred geometry correlations that bridge planetary proportions (circumferential and equatorial relationships) then down-octaved until producing a practical working length (23.49”) for crafting Tensor Rings.

The Lost Cubit is known to facilitate deep tissue and energetic detoxification, influencing subtler regenerative systems beyond the surface-level coherence and inflammation typically addressed by the Sacred Cubit, and is particularly effective in restoring vibrational integrity where stagnation or trauma has taken root in energetic layers not easily accessible through conventional means.

Emotionally, it encourages the gentle surfacing and release of buried patterns, often described as a “truth amplifier” that helps one see clearly through conditioned beliefs and emotional veils, inviting clarity rather than forcing release, making it especially helpful during emotional healing, trauma integration, or inner transformational work.

Spiritually, its 177 MHz frequency assists in lifting awareness beyond the personal field into communion with higher-order guidance systems, enhancing intuitive reception and supporting activation of the upper chakras, particularly the third eye and crown, with many practitioners reporting increased dream lucidity, spiritual downloads, and multidimensional awareness when using Lost Cubit tools in meditation or grid work.

Energetic Benefits

Emits a scalar field resonating at 177 MHz
Free-floating brass spheres enhance energetic movement
Encourages flow, coherence, and physical grounding
Helps to subtly raise subconscious emotional blockages to the surface for recognition, processing, and release
Provides a simple tool for restructuring water back to its original crystalline structure
Helps to mitigate the negative effects of electromagnetic radiation (EMFs)
Supports intention-setting, shadow work, emotional clearing, and auric healing
Symbolically aligned with sacred geometry (the triune principle of body, mind, and spirit)

Common Uses

Place in your meditation or healing space to harmonize your environment and personal field.
Use during therapy sessions or intentional inner work to support emotional processing and clarity.
Carry with you to support ongoing auric coherence and grounding throughout the day.
Position the brass spheres intentionally for a focused effect, or leave them free-floating for a more dynamic field.
Use to charge water, crystals, and spiritual tools.
Incorporate into sacred geometry grid work to enhance field coherence and intention-based practices.

The Empowerment Cubit

The Empowerment Cubit is distinct from the original “New Cubit” or “Empowerment Ring” as outlined in the published literature of the Light Life resources. Rather, it is based on the broader community consensus and practitioner accounts. Measuring 28.857 inches with a resonant field of ~188 MHz, it is revered for its higher vibrational resonance, and ability to operate predominantly in the realm of spiritual consciousness and energetic amplification. Rings constructed to this length - and its subdivisions - emit a measurable scalar field resonating which supports personal transformation, intuitive expansion, and a greater awareness of the collective consciousness.

Pragmatically, the Empowerment Cubit provides the final component in the Primary Cubit Triad, which is preceded by the Sacred and Lost Cubits. This Cubit based Trinity is not doctrinal, but rather it provides a framework for addressing all aspects of being - The Sacred Cubit dealing more readily with the Physical, The Lost Cubit dealing with the Emotional, and finally, the Empowerment Cubit addressing the Spiritual.

Energetic Benefits

Resonates at 188 MHz to support clarity, vitality, and self-empowerment
Balances the energetic body and strengthens personal energy fields
Encourages spiritual growth and connection to higher guidance
Enhances focus, calm, and emotional resilience
Provides subtle energetic protection and coherence throughout daily life

Common Uses

Wear fractional sizes as a pendant to maintain personal energetic balance
Use in meditation or visualization to deepen spiritual alignment
Keep on your person for subtle protection and energy support
Pair with other Tensor tools for advanced energy practices

The Ra Mu Cubit

The Ra-Mu Cubit is a unique Cubit length defined at approximately 29.19 inches (~74.13 cm) with a resonant frequency of 404 MHz. Conceptually, it is similar to the Empowerment Cubit (188 MHz); however, unlike the Empowerment Cubit which provides gradual effects over time, the Ra-Mu Cubit is known for having a more immediate effect due to its divine masculine qualities - strong, direct, and fast-acting.

Its Tensor Field is known for rapidly clearing stagnation, dissolving energetic blockages, and helping to transform outdated or limiting patterns, including work on timelines and deeply rooted subtle-field imprints. Practitioners also turn to the Ra-Mu Cubit for energetic protection, to support relief of physical discomfort, and to facilitate quick, decisive shifts in both personal practice and group energy sessions.

Fractional expressions such as this ¼ Ra-Mu Cubit ring preserve the same 404 MHz resonance in a compact format, making it ideal as a personal tool for close-to-the-body work, portable support, or integration into small harmonizers and layouts.

Energetic Benefits:

Resonates at 404 MHz scalar frequency
Strong, direct Tensor Field that supports rapid clearing of stagnant or outdated patterns
Assists in dissolving energetic blockages and timeline imprints in the personal energy field
Offers masculine-aligned energetic protection and support for easing physical discomfort
Ideal for immediate, deep subtle energy work, meditation, and fast shifts in both personal and group energy sessions

Suggested Uses:

Carry in a pocket or wear on a cord as a compact personal Ra-Mu field for ongoing balance and protection
Place directly on or near areas of physical discomfort to support rapid energetic clearing and relief
Hold during meditation, timeline work, or inner process when a strong, masculine-aligned, fast-acting field is desired
Include in energy layouts, grids, or small harmonizers - especially in triadic Ra-Mu configurations - for comprehensive alignment and integration
Keep near treatment tables, workspaces, or group circles to help maintain a clear, coherent environment during sessions

The STU Cubit

The STU Cubit (also called the Teotihuacan or Harmony Cubit) is derived from Hugh Harleston’s “Standard Teotihuacan Unit” found in the layout of the ancient city of Teotihuacan in Mexico. This unit measures 41.71 inches (1.0594 m), making the 1/4 STU Cubit approximately 10.43 inches in length.

Rather than being tied to a single agreed-upon MHz value, this Cubit is respected for its origin in an ancient, consciously designed standard unit of measure - one that reflects higher-order principles instead of purely utilitarian dimensions.

Energetically, the STU Cubit is associated with harmony, grounding, and alignment with Earth’s natural rhythms. It is often used for “space clearing,” environmental balancing, and integrating subtle energy fields in and around the home or workspace.

Because it arises from the monumental architecture of Teotihuacan, this Cubit is also regarded as a symbolic bridge between ancient Earth wisdom and modern Tensor Technology, carrying forward a measure rooted in sacred design into contemporary energy tools.

Energetic Benefits:

Promotes harmony, grounding, and alignment with Earth’s natural rhythms
Supports environmental balancing and the smoothing of chaotic fields in homes and workspaces
Helpful for integrating personal energy with larger land and planetary grids
Provides a stabilizing, centering influence for meditation and inner work

Suggested Uses:

Carry in a pocket or wear on a cord as a compact STU harmony field for ongoing balance and grounding
Place beneath or near a bottle or glass of water to encourage coherence and a smoother, more “settled” energetic quality
Hold during meditation, breathwork, or energy practices to deepen presence, stability, and connection with Earth energies
Include in room layouts, altars, and grid configurations with other Cubits to harmonize larger spaces and link personal work with broader environmental fields

The Atlantean Cubit

The Atlantean Cubit - also called the Viking / Atlantis Cubit - is a practitioner-standard Cubit length defined at approximately 26.61 inches (67.6 cm) with a resonant frequency of 443 MHz.

Its modern rediscovery is often attributed to Maurice Godfrey, who shared the measurement with dowser Mariana Alves Soprano, followed by prototype testing and evaluation by sensitives in Europe.

It is frequently described as carrying a gentle, feminine, life-bearing quality - often perceived as white, light-pink, and yellow tones - and it is commonly associated with easing emotional burdens, softening energetic tension, and supporting subtle release during times of processing or recovery.

Energetic Benefits:

Resonates at 443 MHz scalar frequency
Supports emotional release, gentle renewal, and energetic lightness
Helps soften tension held in the subtle body and nervous system patterns
Encourages a calmer mind state and a more restful, settled atmosphere
Ideal for shadow work, inner processing, and compassionate self-support

Suggested Uses:

Carry in a pocket or wear on a cord as a compact personal field for ongoing balance and gentle support
Keep near the bed, under a pillow, or on a nightstand to support calm evenings and restful sleep
Hold during meditation, journaling, breathwork, or emotional processing when a subtle, feminine-aligned field is desired
Include in energy layouts, grids, or small harmonizers - especially in triadic Tensor configurations - for comprehensive alignment and integration
Keep near treatment areas, workspaces, or group circles to help maintain a clear, coherent environment during sessions

The 333 Cubit

The 333 MHz Cubit, sometimes referred to as the Straight-Line Cubit, is a unique Cubit measurement of approximately 39.313 inches (about 99.85 cm) that is associated with a scalar resonant frequency of 333 MHz. It is especially valued in sound and resonance work, where it is known for enhancing the depth, coherence, and perceived “color” or quality in voice, instruments, and music, and is particularly known for enhancing sacred and healing tones, such as the Solfeggio Frequencies.

Beyond its use in sound therapy applications, it is also used to support meditation, water structuring, and subtle field harmonization, making it a recognized modern Cubit measurement for those seeking to refine energetic balance and clarity in both personal and environmental contexts.

Energetic Benefits:

Resonates at 333 MHz scalar frequency
Assists in amplifying and harmonizing the tonal aspects of audio and sound, and is especially helpful in sound therapy
Ideal for water structuring and bringing coherence to living systems
Provides a beneficial companion for meditation practices

Suggested Uses:

Carry in a pocket or wear on a cord as a compact personal 333 field for ongoing balance and energetic coherence
Place beneath or above a bottle or glass of water to restructure and harmonize at a molecular level.
Hold during meditation to enhance grounding, clarity, and focus
Include in layouts and grid configurations with other Cubits for layered energetic effects, comprehensive alignment, and deep physical, emotional, and spiritual integration

The Sacred Continent Cubit

The Sacred Continent Cubit is one of the largest Cubit lengths in common use, measuring approximately 173.16 inches (439.8 cm) and associated with a Scalar resonance of 68 MHz. Due to its size, it is rarely built in full-length form. At Being Well, we craft them in specifically chosen fractional lengths for for use as wearables, practical integration within personal spaces, as well as for use in multi-frequency Cubit combinations.

The Sacred Continent Cubit is known for providing a harmonizing and balancing frequency that blends Ying and Yang qualities, generating a soft but expansive protective “bubble” that promotes security, peace, and deeper energetic integration. Many also associate it with improved sleep and a stabilizing field that helps strengthen energetic boundaries and bring coherence to a person or space. These innate qualities provide an ideal tool for cross brain hemisphere integration and alignment.

Energetic Benefits:

Resonates at 68 MHz scalar frequency
Harmonizing, balancing Tensor Field that supports energetic coherence and integration
Said to blend yin and yang qualities for a unified, stabilizing effect
Encourages a calm, protected “bubble” that supports security, peace, and healthy energetic boundaries
Often associated with improved sleep and a gentle but expansive field for stabilizing people and spaces

Suggested Uses:

Carry along with you as compact personal Sacred Continent field for daily balance and calm protection
Keep near the bed or in a resting space to support deep relaxation, integration, and restful sleep
Hold during meditation when you want a soft, stabilizing field that promotes peace, grounding, and energetic safety
Place in a room, workspace, or session area to help stabilize the environment and support coherent boundaries
Combine with other Cubit tools in layouts or harmonizers as a balancing element to help unify mixed energetic qualities

The New Earth / 999 Cubit

The New Earth Cubit, commonly called the 999 Cubit, is one of the more widely adopted newer Cubit measurements to emerge in modern Tensor Technology. It does not have a clearly recorded inventor; rather, it entered general use through charts and toolmaker offerings in the mid-2010s as a complement to the Sacred and Lost Cubits. Its consensus measurement is approximately 15.31 inches (38.88 cm), with a resonant frequency of 432 MHz.

While the number 432 is symbolically linked with 432 Hz audio tuning often used in meditative music, the 432 MHz value referenced here pertains to scalar field resonance rather than an audible tone. The “999” designation is commonly linked with numerological symbolism associated with spiritual transformation and connection to higher states of consciousness.

Its well-defined length and stable frequency assignment have helped establish it as one of the most consistently referenced newer Cubits, valued for portability and subtle energetic qualities.

Energetic Benefits:

Emits a stable 432 MHz tensor field
Associated with calming and stabilizing the nervous system
Often used to support emotional balancing and gentle energetic release
Commonly described as balancing masculine and feminine energetic dynamics
Linked with enhancing inter-hemispheric integration and mental coherence
Often selected to promote inner peace, stability, and a meditative baseline
Frequently used to create a calming field in personal spaces

Suggested Uses:

Wear or place in your space to utilize the 432 MHz field for continued balance
Hold during meditation to support relaxation, presence, and inner stability
Place on a desk or near a workspace to encourage a calmer environment
Keep near a bedside or resting area to support a more peaceful atmosphere
Use alongside 432 Hz meditative music to create a cohesive, calming setting
Incorporate into grids or layouts with other Cubit tools for layered effects
Place in a living space to help maintain a gentle, stabilizing field throughout the room

The Galactic Cubit

The Galactic Cubit, also known as the Ascension Cubit, is a practitioner-standard measurement defined at approximately 24.36 inches, often listed precisely as 24.3594″ (about 61.87 cm) and paired with a scalar frequency of approximately 262 MHz. This Cubit is known for its higher-octave band which is intended to clear distortion fields and support rapid energetic alignment, enhancing connection to the higher self, facilitating smoother entry into meditative states, and accelerating shifts in consciousness.

It is frequently combined with the Lost and Empowerment Cubits in multi-band sets to create more comprehensive energetic tool sets. With its defined length and stable frequency association, the Galactic Cubit has become a familiar component in meditation and consciousness-expansion toolkits, often regarded as a catalyst for fast but stable energetic realignment that complements other core Cubit bands.

Energetic Benefits:

Resonates at 262 MHz scalar frequency
Supports rapid energetic alignment and clearing of distortion fields
Often described as strengthening connection to the higher self and supporting consciousness expansion
Helps facilitate smoother entry into meditation and sustained inner coherence
Useful for fast but stable energetic realignment in both personal practice and shared spaces

Suggested Uses:

Carry in a pocket or wear on a cord as a compact personal 262 MHz field for ongoing coherence and alignment
Hold during meditation to support quicker settling, clearer focus, and deeper internal stillness
Place near a workspace, bedside area, or practice space to encourage a clean, coherent energetic atmosphere
Include in energy layouts, grids, or small harmonizers - especially alongside other Cubit bands - to build layered, multi-frequency support
Use in group sessions as a stabilizing, higher-octave complement to more grounding Cubit tools

The Earth Core Cubit

The Earth Core Cubit, also called the Earth Resonance Cubit, was introduced in 2015 by authors M. J. Pangman and Melanie Evans in their Dancing with Water publication. It is defined as a working length of 19.65 inches (about 50 cm). When constructed into a Tensor Ring made to this precise measurement, the Tensor Field emitted is frequently described as tuned to the Earth’s central core and natural energy field, with a particular grounding and protective effect on water.

The Earth Core Cubit is most often applied to water structuring. It is commonly used around bottles, faucets, and incoming water lines to support water coherence. It is also used for plant vitality and broader environmental harmonization.

Unlike several other Cubit lengths, there is no universally agreed-upon frequency for the Earth Core Cubit. It is sometimes incorrectly labelled as 333 MHz, however 333 MHz is more consistently associated with a different, longer Cubit length commonly referred to as the 333 Cubit (also known as the Straight-Line Cubit). For this reason, the Earth Core Cubit is generally referenced by its defined length (19.65″) rather than a standardized frequency.

Energetic Benefits:

Built to the precise 19.65″ Earth Core Cubit linear length, most commonly associated with grounding and environmental stabilization
Frequently used to support water structuring and protective coherence of drinking water
Often selected to encourage centring, steadiness, and a stronger sense of connection to the Earth
Commonly used for plant vitality and environmental harmonization
Suitable for meditation or restorative practices where a more anchored, stabilizing field is desired

Suggested Uses:

Place around a water bottle, carafe, or glass to support water structuring and coherence
Position around a faucet or near an incoming water line to support water quality at the point of use
Use near plants, seed trays, or growing areas to support vitality and environmental balance
Hold or keep nearby during meditation to encourage grounding and centring
Place in a room, treatment space, or workspace to support a stabilized, coherent atmosphere

Learn More

If you want a deeper, extensive, and structured understanding of Cubit Measurements, our latest book - A Comprehensive Guide to Tensor Rings goes far beyond the basics.

Within this book we explore the core fundamentals including Electro Magnetism, Quantum Physics, Scalar Energy, Tensor Fields, Sacred Geometry, and the role of Intention and Consciousness, alongside the practical craft of physical construction.

This books provides the necessary guidance which allows one to connect theory with personal clarity and confidence. Check it out here